Affinity Compact Indicators; Software Installation - Interacoustics Affinity Compact Instructions For Use Manual

2.5 Affinity Compact Indicators

The Affinity Compact hardware has an LED light indicator which changes status during different operations
of the Affinity Compact Suite and hardware. These different colours and their statuses are listed and shown
below.
The LED light is visible from both the front and the top of the Affinity Compact.
GREEN-Light:
RED-Light:
BLUE-Light:
PURPLE-Light:
LIGHT BLUE-Light:
A dimmed light indicates that the Affinity Compact has entered power saving mode. This can happen in any of
the colours mentioned above.

2.6 Software installation

To know before you Start the Installation
You must have administrative rights to the computer on which you are installing the Affinity Compact Suite.
NOTICE
1. DO NOT connect the Affinity Compact hardware to the computer before the software has been
installed.
2. Interacoustics will not make any guarantee to the functionality of the system if any other software is
installed, with exception of the Interacoustics measurement (AC440/REM440) modules and
AuditBase system4, Otoaccess®, or Noah4 compatible Office Systems or later releases.
What you will need:
1. Affinity Compact Suite Installation USB Drive
2. USB Cable
3. Affinity Compact Hardware
Supported Noah Office Systems
We are compatible with all Noah-integrated office systems which are running on Noah and Noah engine.
To use the software in conjunction with a database, make sure the database is installed prior to the Affinity
Compact Suite installation. Follow the manufacturer's installation instructions provided to install the relevant
database.
Note that if you are using AuditBase you must ensure to launch this office system prior to this installation of
the Affinity Compact Suite.
Installation on various Windows® versions
Windows® 7 (32 and 64 bit), Windows®8 and Windows®10 systems are supported.
Software Installation on Windows® 7
Insert the installation USB and follow the steps below to install the Affinity Compact Suite software. To find
the installation file; click "Start", then go to "My Computer" and double click the USB drive to view the
contents of the installation USB. Double click the "AffinitySuiteSetup.exe" file to initiate the installation.
D-0123234-D – 2020/05
Affinity Compact - Instructions for Use - EN
Ready
Indicates right ear selected in REM and HIT module
Indicates left ear selected in REM and HIT module
Indicates both ears selected in REM and HIT module
Indicates that the Affinity Compact is not correctly connected to the Affinity
Compact Suite
Page 12