Table of Contents
Advertisement
Guidance and manufacturer's declaration — electromagnetic immunity
The Instrument is intended for use in the electromagnetic environment specified below. The customer or
the user of the Instrument should assure that it is used in such an environment,
Immunity test
Conducted RF
IEC / EN 61000-4-6
Radiated RF
IEC / EN 61000-4-3
NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
D-0126472-A – 2020/08
VisualEyes™ 505 Instructions for Use -US
IEC / EN 60601 test
level
3 Vrms
150kHz to 80 MHz
3 V/m
80 MHz to 2,7 GHz
Compliance level
Electromagnetic environment –
guidance
Portable and mobile RF
communications equipment
should be used no closer to any
parts of the Instrument, including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distance:
3 Vrms
d
d
3 V/m
d
GHz
Where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d is
the recommended separation
distance in meters (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey,
should be less than the
compliance level in each
frequency range.
Interference may occur in the
vicinity of equipment marked with
the following symbol:
1
2 ,
P
=
2 , 1
P
=
80 MHz to 800 MHz
=
2
3 ,
P
800 MHz to 2,7
b
a
Page 30
Advertisement
Table of Contents
