General Technical Specifications; Pc Hardware And Software; Standards; Operation And Storage Specifications - Interacoustics VisualEyes 505 Instructions For Use Manual

Hide thumbs Also See for VisualEyes 505:
Table of Contents

Advertisement

6

General technical specifications

PC Hardware and Software

Desktop PC: One PCI Express card slot available (FireWire® systems only) or Laptop PC
USB port required (expanded by USB hub)
Intel i5 processor 2.5 GHz or better, and not older than 5th generation. Minimum 4 cores (4 threads).
Minimum 8 GB RAM or more.
Hard drive with min. 250GB space.
Minimum display of 1366X768 (Higher resolution recommended).
Touch monitor or laptop with touch screen is highly recommended though not required.
Operating systems supported:
Windows® 7 64-bit.
Using operating systems where Microsoft have discontinued software and security support will
increase the risk for viruses and malware, which may result in breakdowns, data loss and data
theft and misuse. Interacoustics A/S cannot be held liable for your data. Some Interacoustics
A/S products support or may work with operating systems unsupported by Microsoft.
Interacoustics A/S recommends you to always use Microsoft supported operating systems that
are kept fully security updated.
Windows® 8.1 64-bit.
Windows® 10 64-bit.

Standards

IEC 60601-1: 2012
IEC 60601-1-2:
2014
ANSI S3.45

Operation and storage specifications

Operation environment:
Transport:
Storage:
Systems can operate on 100 to 240 VAC at frequencies of 50/60 Hz. A grounded plug can be used for the
intended voltage, frequency and socket style used in the customer's region. Only power cables supplied
should be used with the equipment. When used with the rotary chair, an isolation transformer is used to
supply power to the components from power mains.
D-0126472-A – 2020/08
VisualEyes™ 505 Instructions for Use -US
Medical electrical equipment – Part 1: General requirements for basic safety and
essential performance
Medical electrical equipment – Part 1-2: General requirements for basic safety
and essential performance – Collateral standard: Electromagnetic compatibility –
Requirements and tests
Performance standard
Temperature:
Relative Humidity:
Transport Temperature:
Rel. Humidity:
Temperature:
15° – 35° C (59°F - 95°F)
30 – 90%
-20° – 50° C (-4°F - 122°F)
30% – 80% Non-Condensing, Keep Dry
0° – 50° C (32°F - 122°F)
Page 24

Advertisement

Table of Contents
loading

Table of Contents