Part Identification Chart - NordicTrack S22i User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 x 10mm M4 x 12mm M4 x 14mm
Machine Machine Screw (17)–4
M10 Jam Nut M8 x 12mm
Screw (12)–2 Screw (102)–4
(95)–1 Patch Screw
(93)–4
M10 x 20mm M10 x 52mm Bolt (94)–1
Screw (105)–12
6