Clock Setting; Calibration Temperature Setting; Calibration Humidity Setting - AC Infinity CONTROLLER 67 User Manual

PROGRAMMING

CLOCK SETTING

In this setting, adjust the current clock time.
Press the up or down button to increase or
decrease the time. Once you cycle through
12:00 each time, the units will automatically
change to AM or PM. The current clock time
will be shown at the top right corner of display.

CALIBRATION TEMPERATURE SETTING

In this setting, adjust the temperature reading
that the sensor probe is measuring. Press the
up or down button to increase or decrease the
data figure by 2°F (or 1°C) increments. The
calibration cycle ranges from -8°F to 8°F (or
-4°C to 4°C) and will be applied to the sensor
probe's measurements.

CALIBRATION HUMIDITY SETTING

In this setting, adjust the real humidity
reading that the sensor probe is measuring.
Press the up or down button to increase or
decrease the data figure by 1% increments.
The calibration cycle ranges from -8% to
8% and will be applied to the sensor probe's
measurements.
19