HP x4000 Accessory Installation Manual page 36

Installing Accessories
Graphics Card
Figure 2-13 Full-Length Graphics Card Retaining Screw
3. Align the new card carefully and slide it into position. Press it firmly
into the slot.
4. Secure your graphics card:
• If your graphics card came with a separate graphics retainer
Figure 2-14 Graphics Card Retainer Beam
This screw
attaches the
retainer beam to
the rear panel
slot.
34
This manual downloaded from http://www.manualowl.com
beam:
a. Remove both of the universal retainer pieces from the chassis
beam assembly shown in Figure 2-15 and store these in a safe
place for future use.
b. Using the screw that you removed from the rear slot panel and
the graphics card retaining screw shown in Figure 2-13, attach
the graphics retainer beam as shown in Figure 2-14.
Full-Length
Graphics Card
Retaining Screw
Full-Length
Graphics
Card
Retaining
Screw
Chapter 2