Sony NSP-1 Service Manual page 37

This unit has the function of recording the send out log, and it can be controlled by the PC with the
network player management software BZNP-D1.
When an error occurs during a communication between the unit and BZNP-D1, an error code will be
recorded in the log file of BZNP-D1.
To obtain the log, refer to Section 1-11-2.
This section describes the chart of error codes in version 2.01.
For the newest error code chart, please contact your local Sony Sales Office/Service Center.
Error code chart
No. Error description
10010 Schedule starting time has passed
(Starting time has passed at the point where the unit's power has turned on, and etc.)
10011 Command cannot be accepted or executed due to the quiescent operation of HDD
10100 NSP-1 is not operating, while NSP-1 is operating, etc.
10101 System error (error in Linux system call)
10102 Too many parameters
10103 Undefined command
10104 Parameter error
10105 Parameter length error
10110 File cannot be found
10111 File open error
10112 Error in obtaining file information
10113 Device error
10114 File format error (non-renewable format)
10115 No data in data base search result
10120 Error is returned from data base
10122 Serial communication error (time out)
10201 Play back player is not operating
NSP-1
Section 3
Error Code
3-1 (E)