2-1. Removing/Installing Parts
2-1-1. Upper Chassis
n
If a dummy card or PC card is inserted in the PC card slot,
make sure to remove it beforehand.
NSP-1
Section 2
Replacement of Main Parts and Boards
Removal
1. Remove the four labels.
n
Be careful not to damage the upper cabinet.
2. Remove the four screws, and remove the upper
cabinet.
3. Remove the four rubber feet.
n
Be careful not to damage the lower cabinet.
4. Remove the four screws, and remove the lower
cabinet.
5. Remove the front panel in the direction of the arrow.
B2 x 4
Upper cabinet
Front panel
Lower cabinet
B2 x 4
Rubber feet
Labels
B2 x 4
B2 x 4
2-1 (E)