Table of Contents
Advertisement
Figure 3-6. Cascading hubs through the AUI port
NOTE: Ethernet specifications limit segments to 100 stations and 1,640
feet (500 m) in length, and specify that the AUI cable between the hub and
the transceiver is limited to 164 feet (50 m).
Connecting to Other NETGEAR Products
You can extend your network by connecting to an Ethernet switch, such as the
NETGEAR Model SW507 Ethernet Switch. Figure 3-7 illustrates power users on
a 100 Mbps network using the NETGEAR Model FE516 Fast Ethernet Hub and
connecting to the 10 Mbps network through a Model SW507 switch.
Figure 3-7. Connecting multiple NETGEAR products
Completing and Verifying the Installation
Advertisement
Table of Contents
