Table of Contents
Advertisement
For further cabling guidelines, refer to Appendix B, "Cabling Specifications."
Refer to the following illustrations for connecting to the RJ-45 ports and proceed
to "Completing and Verifying the Installation" on page 3-11.
Figure 3-2 illustrates a workstation connected to an RJ-45 port on the Model
EN516 hub.
Figure 3-2. Connecting a workstation to an RJ-45 port on the Model EN516
hub
NOTE: Ethernet specifications limit segments to 328 feet (100 m) in
length.
Cascading refers to connecting hubs together to increase the number of ports, or
the number of users supported on the network. The RJ-45, BNC, or AUI ports
can be used to cascade hubs together. Figure 3-3 illustrates multiple hubs
cascaded in a hierarchical star.
Advertisement
Table of Contents
