Carefully follow below steps.
2. Shake the sealant case.
3. Screw connection hose (10) onto
the connector of the sealant bottle.
4. Ensure that screw cap (9) is
closed.
5. Unscrew the valve cap from the
valve of the flat tyre and screw fill-
ing hose (3) of the sealant bottle
onto the valve.
6. Insert the sealant bottle into the
housing (5) of the compressor so
that the bottle is upright.
OTAM061022
7. Ensure that the compressor is
switched off, position "O".
WARNING
If sealant is dispersed when the
injection hose and tyre air injec-
tion valve have not been fully
connected, the sealant may
overflow and clog the valve.
What to do in an emergency
8. Plug the compressor power cord
into the front passenger side
power outlet of the vehicle.
WARNING
Only use the front passenger
side power outlet when con-
necting the power cord.
OPS043204R
7 27