Kia Soul 2018 Owner's Manual page 427

Hide thumbs Also See for Soul 2018:
Table of Contents

Advertisement

Driving your vehicle
Malfunction indicator
The VSM can be deactivated even if
you don't cancel the VSM operation
by pressing the ESC OFF button. It
indicates that a malfunction has
been detected somewhere in the
EPS (Electronic Power Steering)
system or VSM system. If the ESC
indicator light (
) or EPS warning
light remains on, have the system
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
✽ ✽ NOTICE
• The VSM is designed to function
above approximately 22 km/h
(13 mph) on curves.
• The VSM is designed to function
above approximately 10 km/h
(6 mph) when a vehicle is braking
on a split-mu road. The split-mu
road is made of surfaces which
have different friction forces.
6
50
WARNING
• The
Vehicle
Stability
Management system is not a
substitute for safe driving
practices but a supplementary
function only. It is the respon-
sibility of the driver to always
check the speed and the dis-
tance to the vehicle ahead.
Always hold the steering
wheel firmly whilst driving.
• Your vehicle is designed to
activate according to the dri-
ver's intention, even with the
VSM installed. Always follow
all the normal precautions for
driving at safe speeds for the
conditions – including driving
in inclement weather and on a
slippery road.
• Driving with varying tyre or
wheel sizes may cause the
VSM system to malfunction.
When replacing tyres, make
sure they are the same size as
your original tyres.
Hill-start assist control (HAC)
(if equipped)
A vehicle has the tendency to slip back
on a steep hill when it starts to go after
stopping. The Hill-start Assist Control
(HAC) prevents the vehicle from slip-
ping back by operating the brakes
automatically for about 1~2 seconds.
The brakes are released when the
accelerator pedal is depressed or after
about 1~2 seconds.
WARNING
The HAC is activated only for
about 1~2 seconds, so when the
vehicle is starting off always
depress the accelerator pedal.
✽ ✽ NOTICE
• The HAC does not operate when
the transaxle shift lever is in the P
(Park) or N (Neutral) position.
• The HAC activates even though
the ESC is off but it does not acti-
vate when the ESC has malfunc-
tioned.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents