Kia Soul 2018 Owner's Manual page 299

Audio system
✽ ✽ NOTICE -
Using the iPod
Devices
• To use the audio system's iPod
control function, use the dedicated
cable provided with your iPod
• Connecting the iPod ®
cle during play may result in a
loud noise that lasts about one to
two seconds. Connect the iPod
the vehicle after stopping or paus-
ing play.
• Connect the iPod ® with the vehicle
in the ACC ON state to begin
charging.
• When connecting the iPod
be sure to fully push the cable into
the port.
• When EQ effects are enabled
simultaneously on
devices, such as iPod
audio system, the EQ effects may
overlap, causing sound quality
deterioration or
Deactivate the EQ function for all
external devices, if possible.
• Noise may occur when your iPod
or the AUX port is connected.
Disconnect and store separately
when not in use.
(Continued)
5 28
® (Continued)
• There may be noise if the audio
system is used with an iPod
®
AUX external device connected to
the power jack. In these cases, dis-
® .
connect the iPod
to the vehi-
device from the power jack.
• Play may be interrupted, or device
malfunctions may occur depend-
® to
ing on the characteristics of your
®
iPod /iPhone
• Play may fail if your iPhone
nected through both Bluetooth
USB. In this case, select Dock con-
nector or Bluetooth
®
cable,
®
iPhone to change the sound output
settings.
• If your software version does not
support the communication proto-
external
col or your iPod
®
s and the
due to device failure, anomalies or
defects, iPod
used.
distortion.
®
• iPod nano (5th generation)
devices may not be recognized if
the battery is low. Charge suffi-
®
ciently before use.
(Continued)
• The search and song play order in
® or the iPod
from the search order in the audio
system.
®
or external • If the iPod
internal defect, please reset the
iPod
• Depending on the software ver-
sion, the iPod
®
. with the system. If the media is
®
is con- removed or disconnected before
®
and recognition, the previous mode
may not be restored (iPad
®
on your be charged).
• Cables other than the 1-meter
cable provided with iPod
products may not be recognized.
• When other music apps are used
®
is not recognized on your iPod
function may fail due to malfunc-
®
mode cannot be tion of the iPod
(Continued)
® device may be different
®
has failed due to an
® ®
(consult your iPod manual).
®
may fail to sync
®
cannot
®
/iPhone
®
, the system sync
®
application.
®