Advertisement
Open maintenance window
Open the front panel and remove the right side communication
panel. Open the front panel of the farthest battery from the
inverter and remove DIP baffle. Set the DIP switch 2 to "on"
mode.
Turn off the battery
circuit breaker
Installation & Wiring
Connect the communication cable from the battery to the
inverter.
1 x Communication cable
Installation method of
communication cable
via cable gland
Battery circuit breaker maintenance window
DIP baffle maintenance window
Connect the power cable from the battery 1 to the inverter.
2 x Power Cable
(1 black, 1 red)
Left
view
Only the farthest battery
from the inverter needs to
set DIP.
Right
view
Advertisement
