Compliance; Emc Compliance; Power Supply; Led Compliance - Datalogic STS400 Installation Manual

COMPLIANCE

For installation, use and maintenance it is not necessary to open the readers.
Only connect Ethernet and dataport connections to a network which has routing only within
the plant or building and no routing outside the plant or building.

EMC COMPLIANCE

In order to meet the EMC requirements:

for CBX connections, connect the pin "Earth" to a good Earth Ground

POWER SUPPLY

ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT
This product is intended to be installed by Qualified Personnel only.
This product is intended to be connected to a UL Listed power supply which supplies power
directly to the product.

LED COMPLIANCE

LED emission according to EN 62471.

EAC COMPLIANCE

Customs Union:
The CU Conformity certification has been achieved; this allows the Product to bear the
Eurasian mark of conformity.

CE COMPLIANCE

CE marking states the compliance of the product with essential requirements listed in the
applicable European directive. Since the directives and applicable standards are subject to
continuous updates, and since Datalogic promptly adopts these updates, therefore the EU
declaration of conformity is a living document. The EU declaration of conformity is available for
competent authorities and customers through Datalogic commercial reference contacts. Since
April 20th, 2016 the main European directives applicable to Datalogic products require inclusion
of an adequate analysis and assessment of the risk(s). This evaluation was carried out in relation
to the applicable points of the standards listed in the Declaration of Conformity. Datalogic
products are mainly designed for integration purposes into more complex systems. For this
reason it is under the responsibility of the system integrator to do a new risk assessment
regarding the final installation.
Warning: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
vi