Seat Height (Altitude, Coraille Only); Drum Brakes (Coraille, Coraille-E Only) - Vermeiren Altitude Installation Manual

3.2

Seat height (Altitude, Coraille only)

The seat height can be altered by using a seat cushion of different height, or by adjusting the seat
frame height.
The seat-frame height is adjustable in 3 height positions in steps of
25 mm:
1. At location [A], loosen the socket screw-nut connection (3) of the
gas spring (2) at the gas-spring support (6).
2. Fold the upholstery of the armrest frame up a bit.
3. At location [B], open the brace and remove fastener pin (4) from
the frame tube.
4. Raise/lower the shell to the next adjustment hole on the armrest
frame (1). Insert the pin (4) through tubes (5) and (1) and lock
its brace.
5. Repeat adjustment [B] on the other side of the shell.
6. Remount the gas spring on the support (6) at location [A].
7. Make sure that all connections are firmly secured.
3.3

Drum brakes (Coraille, Coraille-E only)

Both brakes can be adjusted by turning the setting bolt (7) at the
inside of the rear wheel in/out.
Tighten the position with the two nuts.
Make sure that both brakes are adjusted equally.
A
Altitude, Coraille, Altitude-E, Coraille-E
5
2020-11
Assembly and adjustments
1
2
4
3
B
5
6
A
7
EN
NL