Install Dual-Sided Slim Metal Series Analog Clock; Dual Clock Kit Contents; Assemble And Mount Dual-Sided Clock - OneVue 24 VAC Install Manual

Install dual-sided slim metal series Analog Clock

A dual-sided analog clock consists of two analog clocks and a dual clock kit. Using the kit you combine two clocks to
create a dual-sided clock, which can be either ceiling or wall-mounted.
Sites with more than one Transmitter: It's very important to only insert a clock's batteries at its permanent install
location.

Dual Clock Kit contents

(1) Mounting plate
(4) Long screws
(4) Wall anchors

Assemble and mount dual-sided clock

1. Secure the mounting plate to the wall or ceiling with the four long screws, paying attention to the "up" arrow, at the
location you will be hanging the clock.
2. Remove one clock from the bracket by removing two of the four factory installed screws. With the dual clock flat
on a soft surface to protect the lens and bezel, remove the two top screws and lift the top clock off of the dual
mounting bracket.
Page 16