Table of Contents
Advertisement
Install Analog Clock: 12.5" dual-sided
A dual-sided analog clock consists of two single analog clocks and a dual clock kit. Using the kit, you combine two
clocks to create a dual sided clock, which can be either ceiling or wall mounted.
Supplied components
Quantity
Component
1
Dual mount bracket
1
Mounting plate
Screws and anchors supplied with each clock are included in the order packaging.
Step 1: Mount plate to wall or ceiling and assemble bracket
1.
Measure and drill holes on the wall or ceiling to meet the spacing dimensions of the supplied mounting plate, as
shown in the figure below.
2.
Attach the mounting plate to the wall/ceiling using the provided anchors and screws. The mounting plate holes are
to line up with the holes drilled in the wall/ceiling.
3.
Slide the dual clock bracket over the four tabs on the mounting plate. A tap with a rubber mallet on the clock
bracket may be required to set the clock bracket assembly fully into place.
Page 9
Advertisement
Table of Contents
