Remove Analog Clock From Dual Mount Bracket - OneVue 24 VAC Install Manual

Remove Analog Clock from dual mount bracket

This procedure is commonly performed to replace clock batteries.
1. Place your hands at the 10/11 and 4/5 positions.
2. Turn each clock counter clockwise to unlock the clock housing from the twist-lock mount.
3. Reassemble clocks to bracket.
Place clock in the housing with the 10/11 and 4/5 numerals over the brass posts.
Place your hands at the 10/11 and 4/5 positions and turn the clock clockwise to lock into place.
Page 19