Table of Contents
Advertisement
Install 16" dual-sided Analog Clock
A dual-sided analog clock consists of two analog clocks and a dual clock kit. Using the kit you combine two clocks to
create a dual-sided clock, which can be either ceiling or wall-mounted.
Sites with more than one Transmitter: It's very important to only insert a clock's batteries at its permanent install
location.
Dual clock kit contents
(1) Dual mount bracket
(1) Mounting plate
(4) #6 x 1/2 inch long screws
Screws and anchors supplied with each clock are included in the order packaging.
Assemble and install a 16" dual-sided clock
1.
At the installation location, measure and drill holes into the wall or ceiling to align with the mounting plate hole
spacing measurements.
2.
Fasten a supplied #6 x 1/2 inch long screw to each mounting post located on the backside of each clock, leaving a
1/8 to 3/16 inch gap between the screw head and mounting post. It's recommended to have a four channel
separation between adjacent Transmitters.
Page 13
Advertisement
Table of Contents
