Table of Contents
Advertisement
2.
Attach the mounting plate to the wall or ceiling using the provided anchors and screws.
3.
Slide the assembled dual clock bracket over the four tabs on the mounting plate. A tap with a rubber mallet on the
clock bracket may be required to seat the clock bracket assembly fully into place.
4.
Examine the mounting plate to ensure the bracket is fully engaged. The small hole in top side of the mounting plate
should be visible and fully exposed. To increase the security of the clock assembly, a common screw may be
inserted into the hole and screwed into the wall.
5.
Route the power cords as desired and apply AC power. The clocks set to the correct time after they receive a valid
time signal from the system Transmitter.
Page 12
Advertisement
Table of Contents
