Install 12" Dual-Sided Analog Clock (Electric); Dual Bracket Kit Contents; Step 1: Assemble Clocks To Dual Mount Bracket; Step 2: Mount Bracket Kit To Wall Or Ceiling - OneVue 24 VAC Install Manual

Install 12" dual-sided Analog Clock (electric)

A dual-sided clock consists of two clocks and a Dual Clock Kit, which can be either ceiling or wall mounted. Using the
kit, combine two clocks to create a dual-sided clock.

Dual Bracket Kit contents

(1) Dual mount bracket
(1) Mounting plate

Step 1: Assemble clocks to dual mount bracket

1. Place each clock in the housing with the 10/11 and 4/5 numerals over the brass posts.
2. Route the clock power cords to the left, right, or center position. For right or left routing, remove the dual mount
bracket cover and thread the cord through the clearance hole in the bracket. Lift the power cord out of the way,
then slide the bracket cover back onto the dual mount bracket.

Step 2: Mount bracket kit to wall or ceiling

1. Measure and drill holes into the wall or ceiling to align with the mounting plate hole spacing measurements.
Page 11