Table of Contents
Advertisement
Install Analog Clock: 12.5" dual-sided electric powered
A dual-sided analog clock consists of two single analog clocks and a dual clock kit. Using the kit you combine the two
clocks to create a dual-sided clock, which can be either ceiling or wall mounted.
Supplied components
Quantity
Component
1
Dual mount bracket
1
Mounting plate
Screws and anchors supplied with each clock are included in the order packaging.
Step 1: Assemble clocks to dual mount bracket
1.
Place each clock in the housing with the 10/11 and 4/5 numerals over the brass posts.
2.
Route the clock power cords to the left, right, or center position. For right or left routing, remove the dual mount
bracket cover and thread the cord through the clearance hole in the bracket. Lift the power cord out of the way,
then slide the bracket cover back onto the dual mount bracket.
3.
Place your hands at the 10/11 and 4/5 positions and turn the clock clockwise to lock into place. Repeat this step
for each of the two clocks.
Page 11
Advertisement
Table of Contents
