LawnMaster GT1313 Operator's Manual page 12

ASSEMBLY
PREPARING THE TRIMMER FOR USE (See Figs. 8-9)
■ Turn the adjustment collar clockwise to unlock, you can slide the telescopic tube up or down to achieve
comfortable working height (Fig. 8 & 9).
■ Turn the adjustment collar counter-clockwise till the shaft locks into place.
■ Route the extension cord through the slot located on the rear of the grass trimmer housing and place
underneath the cord retainer (Fig. 9).
■ To start the grass trimmer, press the ON/OFF switch.
■ To stop the grass trimmer, release the ON/OFF switch.
WARNING
If any parts are damaged or missing, do not operate this product until the parts are replaced.
Failure to heed this warning could result in serious personal injury.
WARNING
Do not connect to power supply until assembly is complete.
Failure to comply could result in accidental starting and possible serious personal injury.
WARNING
Never attempt to lock the on/off switch in the on position.
Fig. 8
12
Fig. 9