Baxi Slim HPS 1.80 Installer's Instructions page 56

USER INSTRUCTIONS
– In case of fault and/or incorrect equipment operation, deactivate it, without making any repairs or taking any direct
action. Contact the nearest Authorised Technical Service Centre.
– The installation of the boiler and any servicing or maintenance job must be carried out by qualified personnel. Under
no circumstances, the devices sealed by the manufacturer can be tampered with.
– It is absolutely prohibited to block the intake grilles and the aeration opening of the room where the equipment is
installed.
LIGHTING AND OPERATION
BOILER IGNITION
Open the gas valve and press the main swit-
ch to ignite the "Slim HPS" boiler (fig. 14).
TEMPERATURE ADJUSTMENT
The heating temperature can be adjusted
by turning the knob of the thermostat,
which has a range of between 40°C and
85°C.
The temperature setting can be checked on
the thermometer. To ensure optimal boiler
efficiency at all times, we recommend not to
drop below a minimum working temperatu-
re of 60°C. In this way, any formation of con-
densate that might cause deterioration of
the cast-iron body over time will be avoided
(fig. 15).
SAFETY THERMOSTAT
The safety thermostat is of the manually
resetting type and opens, causing the main
burner to turn off immediately, whenever
the temperature of 95°C is exceeded in the
boiler. To restore boiler operation, unscrew
the black cap and reset the button (fig. 16).
Should the appliance again "lock out",
please approach the authorized technical
staff.
SMOKE SAFETY DEVICE
This is a safety device against possible
smoke emission into the ambience.
The safety device switches off the gas valve
when the return of the smokes into the
ambience is continuous and then dange-
rous.To restart the boiler, the cover of the
thermostat must be unscrewed and then
press the underlying button (fig. 17).
Should the boiler "lock out" again, you
must call the authorized technical staff.
56
WARNINGS
Fig. 14
Fig. 15
Fig. 16