Drying Program Finished; Once Drying Has Finished - Asko T712C Operating Instructions Manual

Tumble drying
6

Drying program finished

The text "END" appears on the display
when the program is finished. If the Anti-
crease option has been selected, the drum
will rotate every minute for 2 hours after
cooling.
Important!
• Clean the lint filter after each load.
• Empty the condensed water contain-
er after each load.
Caution!
If the lint filter becomes clogged, the ma-
chine's automatic overheating cut-out may
be triggered. In order to be able to restart the
machine, you must clean the filter and allow
the machine to cool down for around 30 min-
utes.
Cleaning the lint filter
1. Grasp the filter handle and pull it towards
you.
2. Pull the filter out of its holder.
3. Open the filter and remove the lint by hand.
12
4. Fold the filter up and re-insert it into its
holder. The filter may need to be cleaned if it
has limescale deposits. See the "Care and
cleaning" chapter.
Emptying the condensed water container
The condensed water container must be
drained after each load. Remove the con-
densed water container, empty out the water
and replace the container. If the condensed
water container becomes too full, the program
is interrupted and F1 appears on the display.
Empty the container and press the Start/Stop
button to restart the program. See also the
"Error Messages" section in the "Troubleshoot-
ing" chapter.
Note!
Do not remove the condensed water contain-
er while the machine is running.
Tip!
As the condensed water is decalcified, it can
be used in steam irons. Pour it through a cof-
fee filter.
Automatic emptying
If you want the water to empty automatically,
see the "Installation" chapter.
7

Once drying has finished

Turn off the main power switch. Remove
the clothes and close the door to pre-
vent small children from climbing into the
machine.