Siemens Gigaset USB Adapter 300 Manual page 30

30
ì
Uninstall the software.
ì
Then install the software again.
The number of coloured bars in the icon shows the connection quality.
WLAN and security settings
The Gigaset USB Adapter 300 comes with WPS (Wi-Fi Protected Setup). You can
activate the WLAN and security settings very simply if your router/access point
supports WPS.
ì
Click the icon for the Gigaset WLAN Adapter Monitor on the taskbar.
ì
Choose the menu option Without PIN (Apply) as the registration mode on
the tab Configuration – Common.
ì
Press the WPS key (the registration button on Gigaset devices) on your
router/access point.
ì
Click the button Apply.
The connection is then established and your Gigaset USB Adapter 300 is config-
ured.
Software available, grey ball above the icon:
Gigaset USB Adapter 300 not plugged in
Red cross above the icon:
No connection to the connection partner
Green ball above the icon:
Connection established
Gigaset USB Adapter 300