Siemens Gigaset USB Adapter 300 Manual page 25

Gigaset USB Adapter 300
System requirements
To operate the card, you need:
A PC running at a minimum of 466 MHz and one of the following operating
u
systems: Windows Vista, Windows XP or Windows 2000
64 MB RAM and at least 30 MB free hard disk space
u
A free USB slot
u
A CD-ROM drive or a DVD drive
u
Connection possibilities
You can connect the Gigaset USB Adapter 300 to your PC in different ways. The
diagrams corresponding to the following description can be found on the pages
following the cover of this user guide.
Note:
Only insert the Gigaset USB Adapter 300 or the USB cable into a free USB port
on your PC when the Install Shield prompts you to do so.
You can connect the Gigaset USB Adapter 300 as a stick directly to a free USB
u
port on your PC (A).
You can connect the Gigaset USB Adapter 300 to a free USB port on your PC
u
via the USB cable supplied (B).
To optimally adjust the Gigaset USB Adapter 300 for operation in a fixed loca-
u
tion you can install it with the supplied stand (C).
To do so, proceed as follows:
25