Advertisement
Available languages
Available languages
Note: When
a blade, the text on the blade must be
facing the user.
Tighten the blade bolt (22) as
u
Using heavy-duty gloves, grip the blade.
u
Use a 13mm spanner to securely tighten the blade bolt
u
(22) by turning the spanner clockwise (c).
Use
Warning! Let the appliance work at its own pace. Do not
overload.
Warning! Ensure the blade has completely stopped and
disconnect the appliance from the mains.
The height of cut is adjusted by altering the height of all the
wheels, there are 3 positions to choose from.
Remove the grass collection box (7).
u
Turn the lawnmower upside down.
u
Take hold of a wheel (24) and push/pull the axle from its
u
current location.
Move the wheel (24) up/down into the next available loca-
u
tion.
Note: Adjust one wheel at a time. Adjust one height position
at a time.
Switching on
Push in and hold the lock-off button (25).
u
Pull the on/off switch (2) towards the handle.
u
Release the lock-off button.
u
Switching off
Release the on/off switch (2).
u
Warning: Never attempt to lock a switch in the on position.
We recommend to use your mower as outlined in this section
in order to achieve optimum results and to reduce the risk of
cutting the mains cable.
Place the bulk of the mains cable on the lawn, close to the
u
starting point (position 1 in
Switch the appliance on as described above.
u
Proceed as shown in
u
Move from position 1 to position 2.
u
Turn right and proceed towards position 3.
u
Turn left and move towards position 4.
u
Repeat the above procedure as required.
u
Warning: Do not work towards the cable as shown in
as possible by hand.
N1).
N1
(Original instructions)
(Original instructions)
EdgeMax allows you to cut grass right up to the edge of a wall
or fence
J1).
EdgeMax allows you to accurately cut grass right up to the
edge of your lawn
With the lawnmower parallel with the edge of your lawn.
u
Push the lawnmower along the edge of the lawn. Ensure
u
that the EdgeMax (6) is slightly over the edge of your lawn
When mowing the
closes indicating the need to empty.
Emptying the grass collection box
Release the on/off switch (2).
u
Remove the grass collection box (7).
u
Empty the contents from the the box.
u
Carrying the mower
Warning! Ensure the blade has completely stopped and
disconnect the appliance from the mains.
The mower can be carried using the convenient carry
u
handles (9).
Hints for optimum use
If the grass is longer than approximately 10 cm, make two
u
cuts to obtain a better
of cut, then use a low or medium height of cut.
In order to achieve optimum results, only mow dry grass.
u
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Warning! Before proceeding, remove the plug from the
socket.
Problem
Machine fails to
operate
N2.
Machine functions
intermittently
ENGLISH
ENGLISH
J2).
will open, once the box is full, the
First mow at maximum height
Possible Cause
Possible solution
Power turned off
Turn power on
Fuse faulty/blown
Replace fuse
Increase the height of
Grass too long
cut and move machine
to shorter grass to start
Thermal cut out
Allow motor to cool and
activated
increase height of cut
Thermal cut out
Allow motor to cool and
activated
increase height of cut
3
3
Advertisement
