Switch Assembly Rh; Wiper Motor Switch; Head Lamp High/Low Beam Switch; Horn Switch - TVS King GS+ Owner's Manual

TVS King comes with DC headlamp. In this switch position,
' 'head lamp also will glow along with speedometer
lamps, tail lamps, number plate lamp and position lamp
when engine is in running condition.
b) Wiper motor Switch
It has two positions
ON : Wiper motor operates in this position.
OFF : Wiper motor stops operating in this position.
CAUTION
Do not operate the wiper motor on the dry wind shield
glass. During washing please ensure that the wiper motor
is wrapped with polythene sheet to prevent water entry.
c) Self Starter Switch
Press the' ' switch to start the engine electrically with
ignition switch in 'ON' condition and transmission in
neutral.
CAUTION
Do not operate the starter motor for more than 2 sec.
FEATURES IN YOUR VEHICLE

2. Switch assembly RH

It is located on the handlebar RH
a) Head Lamp high/low beam switch
Press the knob towards '
the headlamp and towards '
Use appropriate beam (High / Low) as per the traffic and
road condition for safety and comfortable riding.
b) Horn Switch:
Press the button '
to operate the horn.
a
' to operate in high beam of
' to operate in low beam.
WARNING
' provided on the RH switch assembly
c
b
17