Clutch Cable Inner Replacement; Clutch Cable Assembly At Engine End; Clutch Cable Assembly At Pulley End - TVS King GS+ Owner's Manual

Clutch cable inner replacement

Removal
- Loosen the stopper nut at rear
- Remove cable from release lever ( A )
- Take out the cable from stopper
- Disconnect cable from lever end
- Pull out cable inner from lever end

Clutch cable assembly at engine end

Tool name
Double end spanner
36
SELF MAINTENANCE PROCEDURE
A
Tool size
10 mm, 12mm

Clutch cable assembly at pulley end

Assembly
- Connect cable to clutch lever
- Insert cable inner through cable outer
- Connect adjuster to stopper clutch cable at engine end
- Pull out clutch inner through clutch release lever and pinch
bolt
- Tighten pinch bolt
- To adjust free play, loosen pinch bolt pull cable in or out
and tighten pinch bolt.