Cleaning The Spark Plug; Changing Tyres And Wheels - TVS King GS+ Owner's Manual

- It must switch off as soon as acceleration is given ie.,
engine rpm increases, or else bring the vehicle to
authorised dealer or service centre
CAUTION
Do not run the vehicle if the low engine oil pressure indicator
continues to glow while driving
SPARK PLUG

Cleaning the spark plug

- Pull out the suppressor cap from the spark plug.
- Remove the spark plug by using plug spanner provided in
the tool kit.
Spark plug cleaning
30
SELF MAINTENANCE PROCEDURE
- Clean carbon from the electrodes and around the base
with the help of spark plug cleaner.
- Adjust the gap to the specified limit if incorrect
- Spark plug should be replaced at every 10000km.
To adjust spark plug gap or replacement approach our
Dealer or Authorized service center.
Plug the spark plug hole when the spark plug is removed to
avoid entry of foreign particles inside cylinder
Always use recommended make and type of spark plug.

Changing tyres and wheels

1. Spare wheel removal
Spare wheel is fitted on the frame driver seat assembly.
- Loosen the spare wheel mounting nuts along with spring
washer using 17 mm tubular spanner. ( 2nos.) ( A , B)
0.8- 0.9 mm
- Take out the spare wheel.
Tool name 16 mm plug spanner
Spark plug Gap :
Spark plug Type :
Spark plug cap :
CAUTION
0.8- 0.9 mm
Bosch UR 6 DE
Resistive