Gear Cable Inner Replacement; Gear Cable Assembly At Engine End - TVS King GS+ Owner's Manual

Gear cable inner replacement

Removal
- Loosen lock nut and adjuster nut near pulley at engine end
- Remove cover handle bar ( C ) by loosening two screws
- Remove the lock clip ( D )
- Remove the handle bar sleeve and take out pulley gear
shift.
- Pull out cable inner gear shift
- Loosen pulley gear shift nut at engine end and take the
pulley out

Gear cable assembly at engine end.

SELF MAINTENANCE PROCEDURE
Gear cable assembly at engine end.
Assembly
- Connect gear cable inner to pulley gear shifter at handle
bar end.
- Insert cable inner through cable outer and adjuster
B
- Take out adjuster gearshift cable from stopper
A
- Loosen pulley nut and take out pulley
- Pull out cable inner and connect to pulley at engine end
through pinch bolts
- Apply oil on inner and route it through outer and holes
provided in the pulley gear shifter and tighten pinch bolts.
37