Headlamp Beam Control Switch; Horn Switch; Turn Signal Switch - TVS Rockz Installer's & Owner's Manual

KNOW ABOUT YOUR ROCKZ
1

2. Headlamp beam control switch

" " Low beam: The symbol denotes the
position of low beam to be used when
vehicles are coming in the front side during
night.
" " High beam: The symbol denotes the
high beam position. This is to put the driving
beam while zipping on high ways.
2
" " Pass switch: While overtaking or
passing the vehicles during day time this
switch is pressed intermittently. This works
even when the head lamp switch is in 'OFF'
position.
3

3. Horn switch

Press horn switch (
4
5

4. Turn signal switch

Sliding type switch is provided for operating
turn signal lamp. Pushing the switch to any
one side will operate the corresponding turn
signal lamp and the switch comes back to
middle. In this position turn signal indicator
lamp in speedometer also glows. Pressing the
switch in this position will put off the lamp.
22
) to operate the horn.