Spare Wheel Removal; Tyre And Wheel Changing Procedure - TVS King GS+ Owner's Manual

Spare wheel removal

NOTE
While mounting the spare wheel on the frame driver seat
always make sure that air filler valve is facing down wards.

Tyre and wheel changing procedure.

Removal
- Apply parking brake
- Loosen the wheel retaining nuts diagonally. (4 nos.)
- Place the jack as shown in the fig. (For removing front
wheel B. rear wheel A.)
- Lift up the vehicle until the wheel clears the ground.
- Remove the retaining nuts and take out the wheel.
SELF MAINTENANCE PROCEDURE
A
B
Jack position rear - A
Assembly
- While assembling the spare wheel tighten the wheel nuts
diagonally.
- Lower the vehicle slowly to the ground then tighten the nuts
fully to the recommended torque.
Tool name
Ring spanner, Socket spanner
Tyre pressure
Front
Rear
Jack position front - B
Tool size
17mm
Un-laden Laden
30 psi 30 psi
30 psi 34 psi
31