Table of Contents
Advertisement
The VENTRAC LQ450 Tree Farm Mower is designed to maintain grass and small brush
growth on tree farms and nurseries. Two counter rotating blades discharge the cut
grass to the rear and into the middle section of the mowing path. Suspended front
chains allow tall grass to be cut more effectively and reduce the potential for front
discharge cuttings or debris. The mower should never be operating when a person is
standing or positioned to the front or to the front sides of the mower.
A single swivel tire is located on the front center frame of the mower. The position
greatly reduces tree branch interference. Skid shoes on both sides provide anti-scalping
and blade protection. Branch lifters and tractor tire covers reduce branch damage.
Three pins provide 3 cutting height options.
In dry and dusty conditions the engine and chassis will need more frequent cleaning as
the mower discharge is directed under the tractor. A special shroud over the top of the
engine is standard on LT3000 tractors manufactured after serial # HAA1201. Contact
factory for shrouds for earlier production LT3000 tractors.
If this mower is purchased to mow on slopes where there is roll-over potential, please
purchase the roll cage option and seat belt for the tractor.
Careful, proper and safe operation of this mower will provide efficient, effective, and
attractive results.
Over all width . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 inches
Cut ting width . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 inches
Cut ting height op tions . . . . . . . . . . . . . . . . 2-1/4", 3-1/2", 4-3/4"
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 inches
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 inches
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 pounds
INTRODUCTION
Prod uct De scrip tion
Ventrac LQ450 Spec i fi ca tions
A-1
Advertisement
Table of Contents
