Art SGX-2000 User Manual page 72

which bank the preset came from. If you modified a preset or created one from scratch,
the bank designator letter will change to a "U" indicating the preset is your work. If the
preset location was blank, the LCD will look like:
NOTE: If you store any preset over an existing factory preset in any bank, that
preset will overwrite each existing factory preset in each bank! We suggest you start
storing your presets starting with slot 200 and working down.
WHERE DID THE PRESET COME FROM
If you juggle and shift presets around as well as making your own and then store them in
user memory slots, you may lose track of which preset number in the bank you chose. In
the Utility Mode, there is an easy way to find out where the preset came from. At any
time, press the Edit button, and then the Utility button. You will see a display in the LCD
which looks like:
OPEN
SLOT
The first window indicates no preset is stored into the memory slot and it is "open", ready
to have information stored into it. In the second window, the display indicates a user
preset (a preset you created) is stored into that memory slot location. The last display
indicates preset 91 from bank "A" is stored in memory slot 198.
RECALLING A FACTORY PRESET
If you store over a factory preset memory slot, you do not lose the four factory presets in
that location forever. You may recall any factory preset from any bank at any time. Again
you enter Utility Mode to access this function.
To recall a factory preset first press the Edit Mode button and then the Utility button.
Press the Value button until the display looks like:
"CLASSIC"
BANK =
or
Select the bank you which to recall a preset from with the Encoder. Now, press the Value
button until you see
the preset number and then press the Recall button. the preset then becomes active at the
memory slot you are currently in. You now have the option to store the preset in this
memory slot or transfer it to another. To store in the current slot, just press Store now. If
BLANK PRESET
<no effects>
USER RAM (U)
= 19 SLOT
or
"PERFORMANCE"
BANK =
or
HIT RECALL FOR
A.R.T. PRESET ##
in the LCD window. Use the Encoder to select
BANK A, # 91
= 19 SLOT
or
"PRODUCTION"
BANK =
or
= 19
"CONTRIBUTION"
BANK =
6