Miscellaneous Suggestions - Art SGX-2000 User Manual

Miscellaneous Suggestions

It is not suggested to use a microphone plugged directly into the SGX 2000. Even
though the device will function properly with some types of microphones you may
encounter level mismatch or level problems. Some type of preamplifier is required
since the input sensitivity of most microphones is less than -40dB.
For the effects that have a LEVEL control parameter, use this control to adjust
for depth and apparent mix level for each preset.
To control the overall output level of the SGX 2000 via MIDI, assign an external
MIDI controller to change the Master parameter in the Programmable Level
algorithm. You are able to do this by adding a MIDI controller to your preset and
setting the values accordingly.
Signal level required to trigger the AUTO Record of the Sampler is to input
enough signal to light the GREEN LED.
Signal level required to trigger the AUDIO Play of the Sampler is to input enough
signal to light the YELLOW LED. Use the front panel Digital Input slider to
adjust the threshold level of the audio trigger.
Insert a volume pedal in Loop 1 and use it to control the signal level to your
proccessor.
If you are using the Instrument Input on the front panel you clip the SGX 2000
easily, use the Line Input (L mono) on the rear panel.
46