Store; Rec/Arm; Trigger - Art SGX-2000 User Manual

Art sgx-2000 processors: user guide
Hide thumbs Also See for SGX-2000:
Table of Contents

Advertisement

When you see text within the [ ] brackets, it is describing the text as it
appears in the LCD.
Recall preset 151.
-Press the EDIT MODE button
-Press the DELETE EFFECT once. [DEL:COMPRESSOR?]
*Do you want to delete the compressor? NO.
-Turn the Encoder knob to the right until you see [DEL:ACU ENV SIM?]
*Let's delete this effect.
-Press ENTER, [3
CMP+PTr+REV].
*The effect has been eliminated but not permanently. You will
audibly hear the sound change when the effect is deleted.
*Press STORE to make this change permanent.
-Press STORE now.
With the elimination of an effect, you open up a space to insert
another effect or leave things as they are.
If you press the DELETE EFFECT button and there are no effects in the preset, the
display will read [DEL:NO FX TO DEL].

STORE

Any time you wish to permanently save parameter values in a preset, press the
STORE button. All parameter values you have chosen will be stored into the preset
as well as TITLE, MIX, and ON/OFF Controllers information. When you press the
STORE button the LCD will display [PRESET STORED]. If the phrase [LOCKED/SELECT
LOCATION 111-200] appears don't panic, presets 1 through 110 are factory presets
and though the parameters may be changed, the new values cannot be stored without
first UNLOCKING the presets (see UTILITY section).
TO DELETE A STORED PRESET, thereby releasing its memory to be used again, you
must store a null preset at the preset number you wish to delete.
A null preset
consists of a blank title (all spaces, displayed as <blank title>) and no effects
(displayed as <no effects>). Factory Preset 100 is programmed blank to make it
easy to delete stored presets.
Presets 111 through 200 are null when you receive
your unit or after a factory reset.

REC/ARM

YOU MUST BE USING A PRESET SET UP
FOR SAMPLING AND IN THE EDIT MODE FOR THIS FUNCTION TO OPERATE
To reset the SGX 2000 to record a new sample, press the REC/ARM button.
While you are using any of the Sampler algorithms you will need to "reset" the
record parameter to be ready to record another sample. The REC/ARM button allows
you to return the Sampler to Record-Ready status. Pressing this button wipes out
the existing sample.

TRIGGER

YOU MUST BE USING A PRESET SET UP
FOR SAMPLING AND IN THE EDIT MODE FOR THIS FUNCTION TO OPERATE
This button allows you to either record or play back a sample of the program
material.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgx 2000

Table of Contents