Seven Segment Display; Liquid Crystal Display; Led Effect Indicator Array - Art SGX-2000 User Manual

the output jacks. As you move the slider to the right the output signal level of
the unit increases. When the slider is fully to the right, 100% effect output is
achieved. With this slider you control the level to the Loop 2 effect send and
the XLR outputs, as well as to the final output section.

SEVEN SEGMENT DISPLAY

(Red Numeric Display)
The Seven Segment Display keeps you constantly informed of your Preset Number.
Preset numbers are displayed from 001 to 200. When a preset is active the display
is stable. A flashing display indicates you are in Edit Mode and a preset is
ready to be recalled. The right decimal point will light to warn you your
internal lithium battery is low and needs replacing. When using the Tuner, this
display will become your tuning meter.
LIQUID CRYSTAL DISPLAY (LCD)
All information relative to a preset indicated by the Seven Segment Display is
displayed in the LCD. Backlighting of the display is provided for ease of use in
low light situations. The upper sixteen characters mainly display the Preset
Title (name). If no title has been assigned, the display will read "<blank
title>". In some cases other information will be displayed here. The lower
sixteen characters display mainly the
effects stored, effects to be selected or deleted in the preset, and effect
parameter information. Other information may appear here also. The view angle may
be adjusted and is covered in the following section under the UTILITY function.
A user or factory preset would be displayed in the LCD like the following
representation.
SGX 2000
3 CMP+DST+REV 1
The title appears in the top half of the display. It may be up to sixteen
characters long.
In the center of the bottom half of the display, three letter abbreviations of
the effects in the preset appear.
The number displayed at the bottom left side of the LCD indicates how many
effects are present in the preset. A number at the far right of the bottom half
of the display indicates how many MIDI controllers are assigned to the preset
when Performance MIDI is engaged.
A left or right arrow indicates more information is available for viewing. To
view the information, press the Value button and turn the Encoder left or right.
SGX 2000
5 CMP+DST+REV 1

LED EFFECT INDICATOR ARRAY

Under the LCD are 16 individual LED's which indicate at all times what effects
are present and active in a preset. When an LED is lit, it indicates which effect
is present and active in the preset you are currently using. A flashing LED
6
number and abbreviated description of