Acoustic Environment Simulator; Low Pass Filter; Pitch Transposer - Art SGX-2000 User Manual

-15db
10KHz ___
0db

ACOUSTIC ENVIRONMENT SIMULATOR

[ACU-ENV-SIM], [AES]
Parameter:
OFF, DEAD ROOM, HEAVY CARPET, WOOD/RUG MIX, DRAPE/CARPET,
WOOD + TILE, PEWS/PEOPLE, WOOD BAFFLES, LT FLOOR RUG, CEILING DRAPE, STONE
CEILING, WALL DRAPES, NATURAL WOOD, OPEN AMBNCE [OFF]
The Acoustic Environment Simulator (AES) allows you to simulate adding in baffles
or sound absorption materials to alter the high end response of your signal. Of
course this is a logical as well as necessary option, the SGX 2000 reproduces
sound to 20KHz, well above normal natural ambiance.
Better than an equalizer, the AES program actually knocks out frequencies over
the entire spectrum, simulating real world acoustics. AES lets you warm up a room
or hall, deaden drums, soften a vocal, sizzle your ears off with presence, or
just make your material sound natural.
NOTE: When using AES alone, be sure to control its output level in the Mix with
the ANFX parameter. Due to its location in the signal chain, if you are only
using AES and no digital effects you must use this parameter to bring out the
simulations at the output.

LOW PASS FILTER

[LOW-PASS], [LPF]
Parameter:
HF-CUT: = THRU, 17.8K, 15.8K, 14.1K, 12.6K, 11.2K, 10.0K, 8.91K, 7.94K, 7.08K,
6.31K, 5.62K, 5.01K, 4.47K, 3.98K, 3.55K, 3.16K, 2.82K, 2.51K, 2.24K, 2.00K,
1.78K, 1.58K, 1.41K, 1.26K, 1.12K, 1.00K, 891Hz, 794Hz, 708Hz, 630Hz. [THRU]
There is one algorithm defining the Low Pass Filter. This effect will always be
placed at the front of the digital effects chain so as to tailor the frequency
response of the effect and not the final product which should be further modified
at the board. Thirty possible selections of roll-off frequencies are provided.
PITCH-TRANSPOSER
[PITCH-TRANS], [PTr]
Parameters:
:TYPE= OFF, SMOOTH, NORMAL, QUICK [SMOOTH]
:PITCH = (-)12 to (+)12 half steps in 1 half step increments [0]
:FINE = (-)4.00 to (+)4.00 half steps in 0.06 (six cents) increments [0.00]
ready to set 100Hz band
40Hz,100Hz,640Hz band (+)6dB, 250Hz (+)15dB
_ ready to set 10Khz band
25