Kathy Ireland CF995BS01 Owner's Manual page 7

3. Ceiling Fan Assembly
3.7
Remove One #8 - 32 x 5/16" Pan Head Screw from the
Lower Light Fixture (retain for later use).
Loosen the other Three Screws to assemble the Lower
Light Cover to the Fixture (Figure 7).
3.8
Position the Light Cover above the Fixture and carefully
tuck the Wires and Connectors into the space provided
between the Cover and Fixture as the Cover is lowered
onto the Fixture.
Align the Three Loosened Screw Heads into the Key
Hole Slots on the Cover.
Rotate the Cover Clockwise to engage the Screw
Heads.
Tighten the Screws and reinstall the previously removed
Screw to secure the Cover (Figure 8).
NOTE: Be careful not to pinch any wires or
connectors between the lower light cover and the
lower light fixture.
A spare #8 - 32 x 5/16" Pan Head Screw is in the
hardware bag, if needed.
3.9
Turn the Partially Assembled Ceiling Fan right side up
in preparation for final assembly. Carefully place the
Partially Assembled Ceiling Fan on the styrofoam being
careful not to bend the Ceiling Fan Blades (Figure 9).
(continued)
Figure 7
LOWER LIGHT
COVER
Figure 8
STYROFOAM
PARTIALLY ASSEMBLED
CEILING FAN
Figure 9
Please contact 1-800-777-4440 for further assistance
7
LOWER LIGHT FIXTURE
#8 - 32 x 5/16" PAN
HEAD SCREW (3)
luminancebrands.com
ETL Model No.: CF995-1