Kathy Ireland CF995BS01 Owner's Manual page 19

7. Remote Control Procedures
7.4:
Operation of Remote Control
WARNING
!
Fan installation must be completed, including the
installation of the fan blades, before testing the remote
control.
Your Remote Control has full control of your Ceiling Fan
and Light (Figure 36).
When power is restored, push and hold the FAN
POWER OFF Button (
Code in the Receiver.
NOTE: The Ceiling Fan Lights (if installed) will Blink
to indicate the Transmitter has been paired with the
Receiver.
To turn the Ceiling Fan OFF: Press and release the
FAN POWER OFF ( ) Button.
7.5
To Turn the Fan ON and to Increase the Fan Speed:
Press the ( ) Button once for each of the 6 Speeds
(Figure 37).
To Turn the Fan ON and to Decrease the Fan Speed:
Press the ( ) Button once for each of the 6 Speeds
(Figure 37).
The LED Display will light up to indicate the New Speed
selected.
NOTE: If the fan is OFF, the first time the (
( ) button is pressed, it will turn the fan ON at the
speed previously selected.
) for 3 to 5 Seconds to set the
POWER
INDICATOR LIGHT
FAN BUTTON
ON/OFF
Figure 36
POWER
INDICATOR
LIGHT
) or
Figure 37
19
(continued)
FAN SPEED
INCREASE/DECREASE
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF995-1