Kathy Ireland CF995BS01 Owner's Manual page 11

3. Ceiling Fan Assembly
3.18
The Fan comes with Black and White Wires that are
80-inches long.
Before installing the Fan, measure up approximately
6 to 9-inches above top of Hanger Ball/Downrod
Assembly (Figure 18).
Cut off excess Wires and strip back insulation 1/2-inch
from end of Wires.
3.19
Carefully place the Upper Glass Shade onto the Ceiling
Fan Assembly (larger opening up) (Figure 19).
3.20
Rotate the Four Glass Shade Clamps over the Inner
Edge of the Glass Shade (Figure 20).
Be sure to keep the Rubber Pad beneath each Clamp
to ensure proper clamping.
Carefully secure the Upper Glass Shade by gently
tightening the Four Clamp Screws (Figure 20).
(continued)
6 TO 9
INCHES
1/2
INCH
Figure 18
UPPER GLASS
Figure 19
GLASS SHADE
CLAMP
Figure 20
Please contact 1-800-777-4440 for further assistance
11
BLACK WIRE
WHITE WIRE
HANGER BALL
UPPER GLASS
RUBBER PAD
CLAMP SCREW
luminancebrands.com
ETL Model No.: CF995-1