Troubleshooting - Kathy Ireland CF995BS01 Owner's Manual

FOR YOUR OWN SAFETY TURN OFF POWER AT MAIN FUSE BOX OR CIRCUIT BREAKER PANEL BEFORE
TROUBLESHOOTING YOUR FAN.
TROUBLE
1. Fuse or Circuit Breaker blown.
1. Fan will not start.
2. Loose power line connections to the Fan.
3. Dead Battery in Remote Transmitter.
2. Fan sounds 1. Blades not attached to Fan.
noisy.
2. Screws securing Fan Blades to
Motor are loose.
3. Loose Screws in Motor Housing.
4. Loose Ceiling Cover, Hanger Bracket or
Electrical Outlet Box.
1. Set Screws in Motor Coupler are not
3. Fan wobbles
excessively. tightened securely.
2. Set Screw in the Hanger Ball/Downrod
Assembly is loose.
3. Screws securing Fan Blades to Motor
are loose.
4. Fan Blades are not seated properly.
5. Hanger Bracket and/or Ceiling Outlet Box
is not securely fastened.
6. Fan Blades out of balance.
4. Light fixture will 1. Loose Electrical Connectors.
not illuminate.
2. Remote Control Battery is weak.
WARNING
!
PROBABLE CAUSE
1. Check Main and Branch Circuit Fuses or Circuit Breakers.
Make sure main power is turned OFF.
2. Check line power connections to Fan.
3. Replace the Transmitter Batteries with New Batteries.
1. Attach Blades to Fan before operating.
2. Check to make sure the Screws which attach the Blades to
the Motor are tight.
Make sure main power is turned OFF.
3. Check to make sure all Screws in Motor Housing are snug.
(Not Over-Tight).
4. Check the Ceiling Cover and Hanger Bracket are tight on the
Electrical Outlet Box and the Box is tightly attached to the
building structure.
1. Raise Coupler Cover and tighten Set Screws securely.
2. Tighten the Setscrew in the Hanger Ball/Downrod
Assembly.
3. Check to be sure Screws which attach the Fan Blades
to the Motor are tight.
4. Check to be sure that the Screws securing the Fan
Blades seat firmly.
5. Tighten the Hanger Bracket Screws to the Outlet Box,
and/or secure Outlet Box.
6. Interchanging an adjacent (side by-side) Blade pair can
redistribute the weight and result in smoother operation.
Or use supplied Balancing Kit to balance Blades.
1. Shut off the Branch Circuit Electricity at the Main Fuse Box or
Circuit Breaker Panel and check the Electrical Connectors for
proper installation.
2. Replace the AAA Remote Control Batteries.
Please contact 1-800-777-4440 for further assistance
23
SUGGESTED REMEDY
WARNING
!
WARNING
!
luminancebrands.com
ETL Model No.: CF995-1