Kathy Ireland CF995BS01 Owner's Manual page 6

3. Ceiling Fan Assembly
3.4
Engage the Black Connector of the Lower Light Fixture
with the Black Motor Connector.
Engage the White Connector of the Lower Light Fixture
with the White Motor Connector.
Make sure each Connector latches properly (Figure 4).
3.5
Remove One #8 - 32 x 5/16" Pan Head Screw from the
Lower Light Adapter (retain for later use).
Loosen the other Two Screws to assemble the Lower
Light Fixture to the Adapter (Figure 5).
3.6
Position the Light Fixture above the Adapter and
carefully tuck the Wires and Connectors into the space
provided between the Fixture and Adapter as the
Fixture is lowered onto the Adapter.
Align the Two Loosened Screw Heads into the Key Hole
Slots.
Rotate the Lower Light Fixture Clockwise to engage
both Screws.
Tighten both Screws and reinstall the previously
removed #8 - 32 x 5/16" Pan Head Screw to secure the
Fixture (Figure 6).
NOTE: Be careful not to pinch any wires or
connectors between the lower light fixture and the
lower light adapter plate.
A spare #8 - 32 x 5/16" Pan Head Screw is in the
hardware bag, if needed.
(continued)
LOWER LIGHT
FIXTURE BLACK
CONNECTOR
Figure 4
LOOSEN TWO
#8 - 32 x 5/16"
PAN HEAD SCREWS
Figure 5
LOWER LIGHT
FIXTURE
Figure 6
6
LOWER LIGHT FIXTURE
LOWER LIGHT FIXTURE
WHITE CONNECTOR
MOTOR WHITE
CONNECTOR
MOTOR BLACK
CONNECTOR
LOWER LIGHT
ADAPTER
REMOVE ONE
#8 - 32 x 5/16"
PAN HEAD SCREW
LOWER LIGHT
ADAPTER
#8 - 32 x 5/16" PAN
HEAD SCREW (3)
KEY HOLE
SLOTS (2)
ETL Model No.: CF995-1