Panasonic SG-P Series Instruction Manual page 26

2.3 Parts of the Device
Name
Actuator detection
2
surface
3 Mounting hole
(Note 1) Error contents are different depending on the number of blinkings For details, refer to
"6 Troubleshooting".
(Note 2) When the LED light is checked through the actuator, it may appear segregated between green and red
depending on the observing angle.
Actuator
Name
Switch body detection
1
surface
2 Mounting hole
3 Transmission part
2-10
(Simultaneously light
(Note 2)
green and red)
Alternately blinking red to
yellow
⇔
" "
(lights red, blinking green)
(Note 2)
When the actuator is brought near to the surface, the switch body detects the
actuator.
Use M4 screws, flat washers, and spring washers to mount the switch body on a
machine unit or on a guard.
When the actuator is brought near to the switch body, the switch body detects
the actuator.
Use M4 screws, flat washers, and spring washers to mount the switch body on
a machine unit or on a guard.
The light of the indicator is transmitted through the part.
Function
When an unpaired actuator is detected (only when
using high-code models)
Function
WUME-SGPUM-2