Table of Contents
Advertisement
Installation and Configuration
3
3.2 Mounting on a wall
Use the two wall mount brackets and eight screws (for fixing the wall mount brackets to the
Ethernet Switch) supplied with the mount brackets to fix the mount brackets to the four
holes on each side of the Ethernet Switch. Then securely install the Ethernet Switch onto the
wall using the four screws which have been prepared by the customer.
It is recommended that the screws which are to be used with the screw retainers on the wall
have head sizes with diameters of 9.4 mm or greater.
Right side
Left side
16
Screw holes for wall mount brackets
Advertisement
Table of Contents
