View And Record Video - Axis P3925-LRE User Manual

AXIS P3925-LRE Network Camera
Additional settings
3. Upload an image and click Done.
4. Click Create overlay.
5. Select Image and click Create.
6. Select Image and click Ok.
7. Select Import and upload an image.
8. Select the image from the drop-down list.
9. To position the image overlay, choose Custom or one of the presets.
10. Click Create.

View and record video

This section includes instructions about how to configure your device. To learn more about how streaming and storage works, go to
Streaming and storage on page 20.
Reduce bandwidth and storage
Important
If you reduce the bandwidth it can result in loss of details in the picture.
1. Go to live view and select H.264.
2. Go to Settings > Stream.
3. Do one or more of the following:
Note
The zipstream settings are used for both H.264 and H.265.
- Turn on dynamic GOP and set a high GOP length value.
- Increase the compression.
- Turn on dynamic FPS.
Note
Web browsers do not support H.265 decoding. Use a video management system or application supporting H.265 decoding.
Set up network storage
To store recordings on the network, you need to set up network storage:
1. Go to Settings > System > Storage.
2. Click Setup under Network storage.
3. Enter the IP address of the host server.
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click Connect.
12