Axis P3925-LRE User Manual page 17

AXIS P3925-LRE Network Camera
Additional settings
6. Save the rule.
7. Create a second rule and select the same Condition as in the first rule.
8. In the list of actions, select Toggle I/O while the rule is active, and then select the port the AXIS I/O Indication LED is
connected to. Set the state to Active.
9. Save the rule.
Other scenarios where AXIS I/O Indication LED can be used are for example:
• Configure the LED to turn on when the camera starts, to indicate the presence of the camera. Select System ready as
a condition.
• Configure the LED to turn on when live stream is active to indicate that a person or a program is accessing a stream from
the camera. Select Live stream accessed as a condition.
Send an email automatically if someone spray paints the lens
1. Go to Settings > System > Detectors.
2. Turn on Trigger on dark images. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
3. Set a duration for Trigger after. The value indicates the time that must pass before an email is sent.
Create a rule:
1. Go to Settings > System > Events > Rules and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select Tampering.
4. In the list of actions, select Send notification to email.
5. Select a recipient from the list or go to Recipients to create a new recipient.
To create a new recipient, click
6. Type a subject and a message for the email.
7. Click Save.
To watch this video, go to the web version of this document.
www.axis.com/products/online-manual/66917
How to send an email notification if someone spray paint the lens
. To copy an existing recipient, click .
17